3 |
DC Distribution |
System output voltage |
Rated output:125VDC |
Adjustable range: 90VDC-150VDC continuously adjustable |
System output current |
125V/20A |
System load regulation |
≤ ± 0.5% |
Kev tswj qhov system voltage |
≤ ± 0.5% |
System stability precision |
≤ ± 0.5% |
Tam sim no muaj peev xwm sib koom |
module tam sim no sib qhia tsis ntau tshaj ± 5% |
Xov tooj sib npaug hnyav lub suab nrov |
≤2mV (@230Vac,full load) |
Peak-peak suab nrov voltage |
≤ 200mV(0 MHz ~ 20MHz) (@220Vac,ib nrab load ~ puv load) |
system tam sim no txwv tus nqi |
Fais fab system: 1-22A,Nco tseg: tuaj yeem teeb tsa tsis tu ncua |
Qhov system voltage poob |
Thaum tag nrho load. qhov voltage poob ntawm DC faib nyob rau hauv lub khib yuav tsum hauv qab no 500 mV |
Kev faib tawm |
Load distribution:3@ 135A Rail Mount Terminal |
Roj teeb faib |
Roj teeb faib:1*@135A Rail mount Terminal |
4 |
Module Thiab Monitoring Unit |
Rectifier kub-swap |
Kub-swap available.not influencing system operation |
Rectifier qhia |
nrog operation.alarm.and fault indicators |
Lub sijhawm pib mos |
3s - 10s |
rectifier txhaum kev cuam tshuam |
Not influencing the set parameters of rectifier when rectifier at fault |
Remote monitoring |
With remote metering & remote control & remote signaling functions. providing standard RS485&TCP/IP Interface and 6 sets of the dry contact output port & Battery Temp.Sensor |
Monitoring unit |
English language in LCD screen of the rectifier, |
The parameters can be set through the monitoring unit. with parameter set and power-failure data store functions. Max 1000 Units vents. |
Installation method |
Rectifier module support swappable |
Remote control |
rectifier start and close.battery test. equalize and float charging ,DIN /DO configuration and so on |
Alarm functions |
With AC over voltage/under voltage.DC voltage over/under.module Communication fault and over temperature alarm,Battery remove,Surge and so on |
5 |
Safety |
Insulation resistance |
Testing voltage 500VDC, Insulation Resistance ≥10M (ib txwm atmospheric siab, qhov kub thiab txias, txheeb ze humidity <90%, tsis muaj condensation) |
Rwb thaiv tsev zog |
Input rau cov zis: 3500VDC @ 1 min&Cov dej xau tam sim no ≤10mA |
Input rau enclosures: 3500VDC @ 1 min&Cov dej xau tam sim no ≤10mA |
Tso zis rau enclosures:750VDC @ 1 min&Cov dej xau tam sim no ≤10mA |
Qhov system xau tam sim no |
≤3.5mA(220Vac input) |
Cov kev xav tau ntawm kev ua haujlwm hauv av |
Lub kaw lus nrog kev khiav hauj lwm hauv av thiab kev tiv thaiv hauv av.with meej mark.the tiv thaiv ntawm lub enclosures ntawm tis thiab tag nrho cov palpable hlau Cheebtsam thiab grounding txiv ntoo tsis ntau tshaj 0.1Ω |
AC tiv thaiv xob laim |
The equipment AC side can bear simulated lightning impulse Current of waveform 8/20μS and rated amplitude 40kA.(xaiv tau) |
EMC |
Raws li EN55022 CLASS A,GB 9254 QIB A,FCC PART15 CLASS A,GB17626-1998, IEC 61000-3-2 |
6 |
Batty |
Roj teeb qis voltage tswb thiab tiv thaiv (BLVD) |
Thaum DC voltage hauv qab lub roj teeb tiv thaiv tus nqi thiab tsis muaj AC input. lub roj teeb tiv thaiv alarm.lasting rau 1 min. roj teeb tiv thaiv DC txuas txiav tawm. |
Roj teeb tswj kev ua haujlwm |
Nrog roj teeb tswj kev ua haujlwm; nrog rau kev ua haujlwm ntawm phau ntawv lossis tsis siv neeg hloov pauv ntawm qhov sib npaug lossis ntab them raws li txoj cai ntawm lub roj teeb.tam sim no txwv kev them nyiaj ntawm lub xeev sib npaug; Kub them nyiaj rau qhov system tso zis voltage,(sib npaug thiab ntab voltage tuaj yeem hloov kho tau raws li 1 ~ 2 00 (adjustable) mV / cell / ℃.the siab dua lub roj teeb kub.the qis dua qhov ntab voltage.). |