Top
Hoe om die “statiese skakelaar” ste skakelaar?
Hoe om die “statiese skakelaar” ste skakelaar?

Hoe om die "statiese skakelaar" ste skakelaar?

Statiese oordragskakeling bedrywighede vind plaas gebaseer op die opstart- en oordragproses. Die inisiasieproses is die proses om te bepaal dat 'n oordrag moet plaasvind. The event may include loss of mains power or inconsistent mains voltage. Transfer is the process of transferring load from a second or backup power source and vice versa.
How to use sts transfer switch
Automatic: In automatic mode, the transfer switch controller manages the entire process, and when the controller detects the loss of mains power, start-up begins. The controller monitors the supply voltage and sends a run command to the generator when the voltage falls below a preset limit for a specified time. The controller also monitors the secondary supply voltage and frequency, and when these values ​​are within acceptable ranges, the switch transfers the load from the primary supply to the secondary supply.

The switch can automatically transfer the load back to the mains when the mains is re-established within a specified time to ensure stability. As defined by the NEC, most critical and life safety loads need to operate automatically.

Non-automatic: In the non-automatic mode, the transfer switch is manually activated by the operator, and then the internal device within the switchgear operates the transfer switch by electric operation. The operator has the ability to decide when to initiate load transfer, but the actual transfer operation is electric.
More content: BWITT Power takes you to understand the single-phase static bypass transfer switch

Manual: In manual mode, the whole process is done manually by the operator. Typically there is no controller, voltage sensing device or electrical mechanism to operate the load transfer. Manual switches are the most basic type of transfer switch and are common in non-critical facilities or applications.

The above is how the "statiese skakelaar" sts transfer switch is used, based on the relevant content of the startup and transfer process. Dankie dat jy gelees het, you can pay attention to BWITT enterprises

Los 'n antwoord

Jou e-posadres sal nie gepubliseer word nie. Vereiste velde is gemerk *

Shenzhen Guangdong Provinsie China
reeds 1902 boodskappe

  • Shenzhen Guangdong Provinsie China 10:12 AM, Vandag
    Koop suiwer sinusgolf krag omskakelaar 110v AC tot 240v AC 1kva-10kva 240v suiwer sinusgolf omskakelaar, Koop suiwer sinusgolf krag omskakelaar 110v AC tot 240v AC 1kva-10kva 240v suiwer sinusgolf omskakelaar